dito

Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated.
dito is the most advanced ESD tester to simulate ESD pulses as per IEC 61000-4-2 and other standards requirements.

dito is best designed for the different requirements for testing ESD. Its powerful battery allows to generate more than 50,000 pulses at 16.5kV. This is enough for more than a full day's job. Its different menues lead the user through standard tests, helps to evaluate the test points and allows to find susceptibility levels.
It is unlike any other ESD generators. Its ergonomic design is recognised to be more user-friendly. There is no part of dito that hides the discharge tip while watching the display or operating the dito. You see where you point the tip no matter how you direct dito to the DUT.
The discharge voltage is measured and recorded. Discharge is stopped automatically when battery voltage becomes low. The user is informed when dito cannot charge properly. All this helps to assure reliable and reproducible tests without any question mark and doubt.
Discharge tips and discharge networks can easily be changed without disassembling the dito; simply remove one and plug-on another tip or module. The discharge modules are automatically recognised and the R/C configuration is shown in the display. You just can't use a wrong discharge network!

dito can be operated with one hand only (left or right hand doesn't matter). All operation keys are well in reach of your thumb. The trigger button is operated with your point finger. The large display shows all relevant parameters. The easy-to-follow menu structure allows fast settings and change of parameters.

esd.control goes far beyond being just a remote control and documentation software. It is your ESD Test Manager from A to Z. It covers the preparation of the test (definition of the test plan, including all test points and the generation of test notes), test routine programming, collection of test data and full documentation of every step. esd.control is the state-of-the-art software tool for ESD testing.

The EM TEST ESD simulator series addresses a wide range of test applications from various areas for voltages up to 30kV for both air and contact discharge. Complemented by its esd.control software both ESD 30N and dito become a real ESD test system supporting the user from planning the test until full documentation of the test results.