UCS 500N4
Highlights
- Ultra-Compact Simulator up to 4.4kV
- Burst module (IEC 61000-4-4)
- Surge module (IEC 61000-4-5)
- TSurge module (IEC 61000-4-5); optional
- PowerFail module (IEC 61000-4-11)
- Magnetic field tests with optional accessoires
- Built-in single phase coupler 250V/16A
- Manual operation from front panel
- USB and GPIB-Bus for remote control
- Monitor outputs for peak voltage and peak current
- Fail inputs
- External variac control 0-10Vdc
- Control of external three-phase couplers
Top
Application
Top
UCS 500N4 - Compact Tester for EFT/Burst, Surge and Power Fail
The UCS 500N4 ultra-compact simulator is the most versatile tester to cover transient and power fail requirements according to international standards (basic and generic standards) and product/product family standards. The UCS 500N4 is the most economic solution for tests during development as well as for full-compliant immunity tests and CE Marking for single phase DUT with the ability to be extended for testing three-phase DUTs by means of an automatically controlled external coupling network up to 100A.
EM TEST supplies a large range of accessories for the various applications such as magnetic field tests.
EM TEST supplies a large range of accessories for the various applications such as magnetic field tests.
Top
Standards
Top
- EN 300329
- EN 300340
- EN 300342-1
- EN 300386 V1.3.2
- EN 301489-1
- EN 301489-17
- EN 301489-24
- EN 301489-7
- EN 55024
- EN 61000-6-1
- EN 61000-6-2
- FCC 97-270 (part 68)
- IEC 61000-4-11
- IEC 61000-4-29
- IEC 61000-4-4
- IEC 61000-4-5
- IEC 61000-4-8
- IEC 61000-4-9
- IEC 61326
- IEC 61850-3
- ITU-T K.20
- ITU-T K.21
- ITU-T K.41
- ITU-T K.45
Top
Benefits
Top
All in one - All what you need for your tests
The UCS 500N4 includes everything necessary to conduct fully compliant tests. The power mains supply for the controls and for the DUT is separate to render it more flexible to use with different DUT supply voltages.
The UCS 500N4 can be operated manually from the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow to control an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. Safety features such as interlock and warning lamp control are available.
Pre-programmed Standard Test routines allow highest user convenience. Still the UCS 500N4 offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.
The UCS 500N4 can be operated manually from the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow to control an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. Safety features such as interlock and warning lamp control are available.
Pre-programmed Standard Test routines allow highest user convenience. Still the UCS 500N4 offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.
Top
Operation
Top
Easy to operate
Front panel menu and function keys enable the user to program his test routines quickly and accurately. The cursor allows fast control of all test parameters of the programmed routine, thus test procedures are simplified and confidence is generated that every step is carried out correctly.
Top
Software
Top
iec.control Software for control and documentation
Outstanding user convenience, clearly structured windows and operation features and the EM TEST standards library along with the flexibility to generate user specific test sequences very easily are the main features of iec.control software. The software is automatically configured according to the connected EM TEST generators. Extensive reporting capabilities help the user to create test reports that meet international requirements.
iec.control is supported by Windows 95/98, Windows ME, Windows NT, Windows 2000, Windows XP and Windows Vista. Remote control is achieved either via USB or GPIB. iec.control supports a wide range of GPIB cards of National Instruments.
iec.control is supported by Windows 95/98, Windows ME, Windows NT, Windows 2000, Windows XP and Windows Vista. Remote control is achieved either via USB or GPIB. iec.control supports a wide range of GPIB cards of National Instruments.
Top
Other Models
Top
UCS 500N Series - Compact Testers up to 6.6kV
The UCS 500N ultra-compact testers for EFT/burst, Surge and Power Fail are available in two different models; with voltage capability up to 4.4kV or up to 6.6kV.
Top
Auxiliary Devices
Top
CNI 503 - 3phase coupling/decoupling networks for burst and surge
EM TEST offers a range of fully automatic 3-phase coupling/decoupling networks for burst and surge to extend the test capability for three-phase DUTs. The networks have a rated current of up to 100A.
MV 2616 - Motorised variac for voltage variation
A motorised variac is offered as an alternative to the tapped autotransformers for voltage dips/interruptions and voltage variation tests as per IEC 61000-4-11. The motorised variac can also be used for automated magnetic field tests.
CNV 504N/508N - Surge coupling/decoupling networks for signal/data lines
CNV 504N/508N coupling/decoupling networks are available to perform surge tests on I/O lines, signal/data lines and telecom lines as per IEC 61000-4-5.
Top
Accessories
Top
V 4780 - tapped voltage transformer for voltage dips and interruptions
The V 4780 tapped autotransformer is designed to supply the required voltages as per IEC 61000-4-11 Ed.2:2004 to perform voltage dips and interruptions.
V 4780S2 - tapped voltage transformer for voltage dips and interruptions
The V 4780S2 tapped autotransformer is designed to supply the required voltages as per IEC 61000-4-11 Ed.2:2004 to perform voltage dips and interruptions. Compared to the manually operated V 4780 the V 4780S2 model offers automatic change of taps according to the selected voltage level.
MS 100 - magnetic field coil for power-frequency and pulsed magnetic fields
The MS 100 is a 1sqm magnetic field coil as specified in IEC 61000-4-8 and IEC 61000-4-9. Being mounted on a trolley and fixed to a mast it is movable, adjustable in height and allows for 360degr rotation.
To generate power-frequency magnetic fields in the lower range the current transformer MC 2630 is used while high-field strength above 100A/m requires the MC 26100 current transformer.
To generate power-frequency magnetic fields in the lower range the current transformer MC 2630 is used while high-field strength above 100A/m requires the MC 26100 current transformer.
HFK - Capacitive coupling clamp
The HFK is a fully compliant capacitive coupling clamp as per specification of IEC 61000-4-4.
ITP - Immunity Test Probes
ITP is a tool being used for development test. It consists of a variety of electrical field probes. The probes allow to locate weak points within a system or on a PCB. The burst pulse is used to generate the disturbance signal.
CA EFT kit - Verification kit for EFT/burst pulses
As per IEC 61000-4-4 Ed.2 the characteristic of the burst generator needs to be verified with two different loads, 50ohm and 1,000ohm. EM TEST offers a calibration kit consisting of the two loads and an adapter to verify the pulses at the DUT output.
Top
