NETWAVE 7
Highlights
- Wide Power Bandwidth; DC - 5kHz
- Output Power 7,500VA AC and 9,000W DC
- Output Voltage 300V AC, 425V DC
- High Inrush Current Capability
- Built-in Arbitrary Waveform Generator
- Standard Test Routines for EN/IEC requirements as well as for Aircraft and MIL-STD testing
- Built-in voltage and current measurement (option)
- Multiple Interfaces
Top
Application
Top
NetWave 7 - Simulation of the most required power supply phenomenon
The NetWave 7 is a single phase AC power source, specifically designed to meet the requirements as per IEC/EN 61000-4-13, IEC/EN 61000-4-14, IEC/EN 61000-4-17, IEC/EN 61000-4-28. It is also serving as a DC power source to cover the requirements as per IEC/EN 61000-4-29 for voltage dips and interruptions on DC supplies.
Its output power with low distortion and high stability, even if supplying dynamic loads, guarantees full compliant measurements for harmonics and flicker testing as per IEC/EN 61000-3-2, JIS C 61000-3-2 and IEC/EN 61000-3-3 as well as per IEC/EN 61000-3-11 and IEC/EN 61000-3-12.
Additionally, the NetWave 7 is also well suited for avionics testing as per DO-160, Airbus ABD0100 and Boeing as well as per MIL-STD-704.
Its output power with low distortion and high stability, even if supplying dynamic loads, guarantees full compliant measurements for harmonics and flicker testing as per IEC/EN 61000-3-2, JIS C 61000-3-2 and IEC/EN 61000-3-3 as well as per IEC/EN 61000-3-11 and IEC/EN 61000-3-12.
Additionally, the NetWave 7 is also well suited for avionics testing as per DO-160, Airbus ABD0100 and Boeing as well as per MIL-STD-704.
Top
Standards
Top
- AIRBUS
- BOEING
- EN 61000-3-11
- EN 61000-3-12
- EN 61000-3-2
- EN 61000-3-3
- EN 61000-4-13
- EN 61000-4-14
- EN 61000-4-17
- EN 61000-4-28
- EN 61000-4-29
- IEC 61000-3-11
- IEC 61000-3-12
- IEC 61000-3-2
- IEC 61000-3-3
- IEC 61000-4-13
- IEC 61000-4-14
- IEC 61000-4-17
- IEC 61000-4-28
- IEC 61000-4-29
- JIS C 61000-3-2
- MIL-STD-704
- RTCA/DO 160 Section 16
Top
Benefits
Top
NetWave 7 - The powerful multitalent for AC and DC supply simulation
The programmable AC and DC power source with its wide frequency bandwidth offers powerful waveform generation capabilities for various test applications in the EMC area and for avionics testing.
Based on a Dual-Processor technology, with an integrated high-performance PC, a digital signal processor (DSP) and equipped with a hard disk the NetWave 7 is capable to generate and record waveforms in realtime.
According to standard requirements a pure sinusoidal voltage is needed for harmonics and flicker measurements. The output voltage of the NetWave 7 is therefore guaranteed to have a very low distortion (THD) of less than 0.1% regardless of the load.
No matter whether waveforms are programmed of segments or of single points (normally resulting in MBs of data) the NetWave 7 will do. Recording of waveforms with up to 1GByte is easily possible. The measuring channels are designed to handle upt to +/- 500Vpeak and +/-150Apeak with 16bit resolution.
Interfaces like GPIB, Ethernet and USB (to connect a memory stick) are common features with the NetWave 7.
Based on a Dual-Processor technology, with an integrated high-performance PC, a digital signal processor (DSP) and equipped with a hard disk the NetWave 7 is capable to generate and record waveforms in realtime.
According to standard requirements a pure sinusoidal voltage is needed for harmonics and flicker measurements. The output voltage of the NetWave 7 is therefore guaranteed to have a very low distortion (THD) of less than 0.1% regardless of the load.
No matter whether waveforms are programmed of segments or of single points (normally resulting in MBs of data) the NetWave 7 will do. Recording of waveforms with up to 1GByte is easily possible. The measuring channels are designed to handle upt to +/- 500Vpeak and +/-150Apeak with 16bit resolution.
Interfaces like GPIB, Ethernet and USB (to connect a memory stick) are common features with the NetWave 7.
Top
Software
Top
netwave.control - Editing, documenting and managing your waveforms and standard tests
netwave.control is the tool to easily and conveniently control the NetWave. By means of netwave.control the user can program any kind of waveform either composed from segments or points and download into the NetWave.
Enhanced graphic tools are at hand to adjust the waveform according to individual requirements. Netwave.control provides a library of an extensive compilation of predefined segments as well as a large number of standard test routines as per EMC and avionics standards.
netwave.control is also handling any waveform recorded by other method (e.g. captured by an oscilloscope) or imported as Excel or CSV files. All waveforms can be downloaded into the NetWave.
netwave.control offers an enhanced reporting tool to generate test/measuring reports and can be used under Windows 2000, Windows XP, Windows Vista and Windows 7.
Enhanced graphic tools are at hand to adjust the waveform according to individual requirements. Netwave.control provides a library of an extensive compilation of predefined segments as well as a large number of standard test routines as per EMC and avionics standards.
netwave.control is also handling any waveform recorded by other method (e.g. captured by an oscilloscope) or imported as Excel or CSV files. All waveforms can be downloaded into the NetWave.
netwave.control offers an enhanced reporting tool to generate test/measuring reports and can be used under Windows 2000, Windows XP, Windows Vista and Windows 7.
Top
