NEWS 2006


New Continuous Wave Simulator for low frequencies 10Hz - 250kHz

EM TEST has launched the first compact tester to address low-frequency test requirements known from the automotive industry as well as from aerospace and military test applications. Being a dedicated standalone test equipment the
CWS 500E covers requirements for conducted low-frequency disturbances (e.g. voltage ripple) and low-frequency magnetic field testing requirements.
Unifying the signal generator, the LF amplifier and the coupling transformer for the signal generation combined with the necessary measuring technique (frequency-selective current and voltage meters) plus built-in loads for system verification. No additional wiring is required for the test set-up other than the connection of the DUT and its supply voltage.

The CWS 500E is the easy-to-use and ready-to-go solution suitable for use in the test lab, for tests during product development and for on-site tests with narrow space conditions. For further information please contact your local EM TEST representative.

New Start in the US and Canada

Rohde & Schwarz USA, located in Irving, TX, has taken over the EM TEST sales and service business for the US and Canada. Together with their nationwide sales organization, excellent service capabilities and industry presence, this is an exact fit, and a great step forward for our sales in the US and Canada.
Rohde&Schwarz and EM TEST are used to work in the Test & Measurement area for many years and therefore very well understand the need of customers in this field. Together Rohde&Schwarz EMC division and EM TEST have an extraordinary product coverage in the EMC market, from single box solutions to turnkey facilities or anything in between, from emission measurements to immunity testing. There is a solution for nearly everything no matter whether it is Automotive, Commercial, Telecom or Military applications.

EMV 2006 at Düsseldorf - A Review

Once again the EM TEST booth was the highlight at the EMV 2006 in Dusseldorf.

As usual, EM TEST impressed its visitors with an extraordinary gig. Because of the football world championship which takes place in Germany, this year`s booth motto was the global sport event.

Of course, EM TEST convinced with a variety of innovations. The presentation of the brand-new Electronic-Fast-Transient-Simulators EFT 500M8 (up to 7 kV according to current burst standard) as well as the extension of the record function for the new AutoWave. ‘The advanced Continous-Wave Simulator CWS 500 C with its extended frequency range up to 300 MHz called particular attention just as all EM TEST product news. Worth to mention is the presented development of the messtec EMI receiver UCR 3000M, which besides its new technical highlights has integrated a click meter. Furthermore, Mr. Detlef Schiemann, general manager of messtec GmbH, Berlin, held a comprehensive tutorial about “emission measurements conforming to standards, low-priced and their implementation; a speech that numerous auditors listened to.

EM TEST was pleased to welcome a large number of visitors and prospective customers on the innovative EM TEST booth. Many of them took advantage of the unexpected opportunity to play a match at one of the both EM TEST ´s table soccer. A lot of new contacts were established as well as existing business relations were cultivated and deepened.

EM TEST (M) Sdn. Bhd. at the EMC Zurich Symposium in Singapore

A few weeks after the opening of the new office EM TEST Malaysia participated in the EMC Zurich Symposium held in Singapore for the first time. Present with a fairly big booth our range of products could be demonstrated to a large number of prospective customers introducing ourselves as a competent partner for EMC testing.
During the Organiser's Dinner at the Singapore Zoo Brendon Lim, Manager of
EM TEST (M) Sdn. Bhd., was handed over an Award by the Symposium Committee honouring EM TEST as a sponsor of this event.

The picture shows Brendon Lim just before the exhibition was opened.

News from the US

The response from our US customers about the changeover in distributorship is very positive. We got lots of supporting comments from existing customers, while going through the current dispute with AR, encouraging us to restart business in the US as soon as possible. Customers are very happy with EM Test equipment and, of course, they are interested in using it further. We are very optimistic that this case will be settled soon. In the meantime we will fully support all customers directly from Switzerland.

Some customers are questioning about the economic influence to the EM TEST business. Our answer is a simple one: No need to worry about EM TEST!
2005 was the most successful year in the history of EM TEST. Growth in incoming orders was 25% compared to 2004 (which was the best year we ever had so far). And this was reached despite sales in the US was low already in 2005. 2006 has started with even better figures than we had seen at the end of 2005. EM TEST business is extraordinary good in Europe and Asia.

We will keep you informed about the progress in this matter.

Change in the distributor network of North, Central and South America

Amplifier Research has decided to design their own products and to build up a competitive product line against EM TEST. EM TEST has terminated the agreement for distributorship by November 30, 2005.

For unexplainable reasons AR refuses to accept the termination but continues insisting instead on their exclusive rights. AR still wants to control the sales of EM TEST products, probably due to the fact that they have not yet finished the design of their own product range. EM TEST was forced to court therefore. So far AR’s motions have been denied upon EM TEST’s opposition thereto and it seems that everything will turn out well.

The case is not settled yet. Nevertheless, EM TEST feels obligated to now restart supreme sales and after sales service together with a new sales partner in the above mentioned territories.

For a short while, until negotiations will be accomplished, EM TEST offers best possible support from Switzerland. We invite our esteemed clientele to contact us directly when ever we could be of service.

EM TEST goes South-East

EM TEST is proud to announce that as of today a new office has started operation to cover the SEA area, primarily focusing on Malaysia, Thailand and Singapore. This office, the second in Asia, is responsible for sales and aftersales and takes EM TEST to the frontdoor of our customers in this growing market. Being located in Selangor, Malaysia, the important industrial areas are in reach of a stone's throw from our office.

Office address and contact details:
EM TEST (M) SDN BHD, No.19, Jalan Berjaya 5
Taman Gombak Tambahan
68100 Batu Caves, Selangor

This step enables EM TEST, as market leader of EMC test equipment, to enforce its world-wide presence and above all to offer first-hand EM TEST expertise, products and service to our customers.
NEWS 2006

By continuing to use the site you agree to our privacy and cookie policy.

More information