Software esd.control

SOFTWARE: esd.control


esd.control - The highlights

Why to use a software to perform ESD tests? Because it makes your life easier and helps to make tests more reliable and reproducible.

esd.control isn't just a remote control software. It helps you to set-up your test plan and test procedure, guides you through the test telling you which test point is now to be tested and creates a full and detailled report. Try what esd.control can do for you. You will like it.

The current version esd.control 6.0.0 offers:

  • Windows 7, Windows 8 (64 Bit) and Windows 10 compatibility
  • Support of USB and optical USB interfaces
  • Library of actual basic and generic standards as well as product
    and product family standards
  • Supports the Bleed-Off function in the tripod test mode
  • Easy-to-use and intuitive creator for test plans and test procedures
  • Enhanced and highly flexible reporting capabilites
  • Up-to-date design and navigation
  • Intuitive operation


Standard library

New standards implemented in the 6.0.x release:

  • EN 12016 (2013-12)
  • EN 55014-2 (2016-01)
  • IEC 60255-26 (Edition 3, 2013-05)
  • IEC 60947-2 (Edition 5, 2016-06)
  • IEC 61204-3 Edition 3, 2016-10)
  • IEC 61326-2-4 (Edition 2, 2012-07)
  • IEC 61800-3 (Edition 3, 2017-02)
  • IEC 61000-6-1 (Edition 3, 2016-08)
  • IEC61000-6-2 (Edition 3, 2016-08)
  • IEC61000-6-7 (Edition 1, 2014-10)
  • EN 61000-6-1 (2016-05)
  • EN 61000-6-2 (2016-05)
  • EN 61000-6-7 (2015-12)
  • IEC 60601-1-2 (Edition 4, 2014-02)
  • EN 300386 (Version 2.1.1, 2016-07)
  • EN 55024 (2016-05)
  • Telcordia GR-1089-CORE (Issue 6, 2011-05)
  • EN 50121-3-2 (2016-01)
  • EN 50121-4 (2016-01)
  • EN 50121-5 (2016-01)
  • BMW GS 95002-2 (2013-07)
  • Case New Holland ENS0310 (Revision K, 2013-12)
  • Caterpillar EC-42 (Revision 4, 2015-05)
  • Ducati DMH 34-03.001 (Ed.4 2015)
  • FCA CS.00054 (2015-01)
  • Ford FMC1278 (2016-10)
  • General Motors GMW 3097 (2015-06)
  • ISO 10605 (Amendment 1, 2014-04)
  • Jaguar-Rover JLR-EMC-CS_V1.0 (Amend. 4, 2015-02)
  • John Deere JDQ 202 (2015-03)
  • Mazda MES PW 67602 (2015-11)
  • Mercedes MBN 10284-1 (2015-07)
  • Mercedes MBN 10284-2 (2015-07)
  • Mercedes MBN 10284-4 (2017-05)
  • Nissan 28401 NDS02 [8] (2016-03)
  • Peugeot/Citröen PSA B21 7110 (Rev. E, 2015-09)
  • Renault 36-00-808-N (2016-03)
  • Ssangyong SES-E-922 (Issue 5, 2013-10)
  • Tesla TS-0000048-06 (2015-08)
  • Volvo 31850329 (Revision 4, 2014-06)
  • Volvo STD 515-0003 (Revision 5, 2017-02)
  • Volvo REQ-043878 (2014-02)
  • Volkswagen VW TL 810 00 (2018-03)
  • Volkswagen VW TL 824 66 (2013-05)
  • DO-160G (2010-12)
  • MIL-STD-461G (2015-12)

New Devices and Equipment implemented in the 6.0.x release:

  • esd NX30



The ultimate ESD test software

esd.control is a high-sophisticated software tool that enlarges the outstanding features and capabilities of the EM TEST ESD testers to become an unreached ESD test facility.
The navigation is easy and configurable according to the user's profile by means of a password.
Help information is offerd to guide the user through the various steps of the functionality of the software.
esd.control is also used to update the firmware of the EM TEST ESD generators.


Where an ESD Test starts

Where an ESD Test startsZoom

Every ESD test starts with the specification of the test points and the test levels that shall be applied at each test point, complemented by the number of discharges and the polarity. A test note can be generated including graphics of the DUT. This test note can be printed out and is then used during test.
esd.control helps to define the test routine either based on an a standard test routine of an existing test routine or to create a new test routine following the test note.


Standards Library and Test Routine Manager

Standards Library and Test Routine ManagerZoom

esd.control includes a large library of various standards test routines. Apart from standard test routines you can create your own, specific test routines. They will be added to the already existing test routine data base.
esd.control is capable to manage an unlimited number of test routines in its data base.


Tripod Test Routine

Tripod Test RoutineZoom

esd.control offers a separate menu to set up and run tripod tests. The parameters can be defined manually or based on a standard test routine with different test levels including a voltage sweep function.


Prepared for Testing

Prepared for TestingZoom

Once the test routine is defined it is downloaded into ESD generator via the optical interface OptoLink. The ESD generator is now ready for the test. The test person is guided through the test as dito indicates the test point where the next discharges have to be applied. Hence ESD tests are now performed with highest possible reliability.
During test the ESD generator records all results and possible events (fail conditions etc.).


Test Reporting and Data Management

Test Reporting and Data ManagementZoom

All event information, along with the test results, are uploaded to esd.control after the test has been completed. The report can be generated adding some more information about the test set-up, test points and fail reports. The report can be printed using customer specific layout mask files.
All test-related data (test notes, test files, test data, test reports) are kept in the esd.control data base.


SOFTWARE: esd.control

We are only one eMail away

Your direct link to EM TEST

By continuing to use the site you agree to our privacy and cookie policy.

More information